Service Areas

From North Dallas / Collin County Corridor (Frisco, McKinney, Allen, Plano, The Colony, Little Elm, Murphy, Wylie, Sachse, Addison, Richardson, Carrollton)

General Route:

1. Head southwest on local toll roads or US-75 S / Dallas North Tollway to reach I-35E S.

2. Merge onto I-35E S, then connect to I-35W S via TX-121 or TX-183.

3. From I-35W, exit onto US-67 S briefly, then take TX-174 S through Cleburne.

4. Pick up TX-36 N from Cleburne, which takes you directly into Gatesville.

5. Once in Gatesville, turn right (east) on US-84 to reach 8072 US-84.

From Central Dallas Metro Area (Dallas, Garland, Mesquite, Rowlett, Rockwall, Irving, Grand Prairie, Duncanville, DeSoto, Lancaster)

General Route:

1. Use I-20 W or I-30 W to connect to I-35E S, then transition to I-35W S.

2. From I-35W S, take TX-174 S through Cleburne.

3. Continue on TX-36 N through Hamilton into Gatesville.

4. Turn east on US-84 to reach the address.

Alternative (Rockwall, Rowlett, Mesquite):

• May be faster to go west across I-30 to reach I-35W S.

From Western Metro (Fort Worth, Arlington, Bedford, Euless, Hurst, Keller, Grapevine, Southlake, Colleyville, Coppell, Flower Mound)

General Route:

1. Get to I-35W S via TX-121 S or TX-183 W depending on where you’re starting.

2. Take I-35W S to TX-174 S (Cleburne exit).

3. In Cleburne, transition to TX-36 N.

4. Drive north through Hamilton, continue into Gatesville, then turn right onto US-84 E.

From South of DFW / Southern Burbs (Mansfield, Burleson, Cleburne, Waxahachie, Ennis)

General Route:

Cleburne is the natural junction point for many of these routes:

1. 1. Use TX-174 S or US-67 W to reach Cleburne.

   2. From Cleburne, take TX-36 N to Gatesville.

   3. In Gatesville, turn right onto US-84 E to reach 8072 US-84.

From Waxahachie / Ennis:

• Use US-287 N or I-35E N to cut across to I-35W S, then follow the same Cleburne > TX-36 route.

From Northwest DFW & Outskirts (Denton, Lewisville, Weatherford)

Denton / Lewisville:

1. Take I-35W S directly.

2. Exit onto TX-174 S to Cleburne, then TX-36 N to Gatesville.

Weatherford:

1. 1. Take US-377 S to Granbury.

   2. Then head east briefly on US-67, pick up TX-144 S, then connect to TX-36 N.

   3. Continue to Gatesville, then east on US-84 to your destination.

​

📍 Destination Details:

• Address: 8072 US-84, Gatesville, TX 76528

• Business: American Vintage Trailers

• Phone: (254) 248-1186

• Website: https://www.airstreamrepairandremodel.com

This location is situated on the eastern edge of Gatesville along US-84 – click here to get exact directions from your location.

From the Piney Woods North Region (Tyler, Longview, Kilgore, Marshall, Carthage, Henderson)

General Route:

• Head west toward I-20 W or US-79 W based on your location.

1. Option 1 (from Tyler or Longview):

   • Take US-31 W or I-20 W to Athens or Corsicana.

   • Then take TX-7 W or TX-22 W to Marlin or Cameron.

   • Continue on TX-36 N into Temple, then Gatesville.

2. Option 2 (from Marshall or Carthage):

   • Use US-59 S → connect west via TX-79 W or TX-21 W through Palestine or Crockett.

   • Join the TX-36 N corridor through Cameron and Temple.

• Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: For fastest routing, cut down to Buffalo or Centerville and use TX-7 W to reach TX-36 N.

From the Central East / Deep Country Towns (Palestine, Jacksonville, Rusk, Athens, Nacogdoches, Alto)

General Route:

• Head west via TX-79 W, TX-21 W, or TX-7 W, depending on starting point.

1. Option 1 (from Palestine or Jacksonville):

   • Take TX-79 W to Buffalo, then connect to TX-7 W toward Marlin.

   • Merge with TX-36 N, and continue north through Temple to Gatesville.

2. Option 2 (from Nacogdoches or Alto):

   • Take TX-21 W through Crockett to Centerville.

   • Continue west on TX-7 W to Marlin, then north on TX-36 N.

• Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Athens, take TX-31 W through Corsicana → then TX-22 W to merge with TX-36 N.

From the Sabine Borderlands (Center, San Augustine, Hemphill, Shelbyville, Joaquin)

General Route:

• Head west using TX-21 W or TX-7 W through Nacogdoches or Crockett.

1. Option 1 (from Center or San Augustine):

   • Take TX-21 W to Crockett, then west to Centerville.

   • Use TX-7 W to reach Marlin, and then north via TX-36 N.

2. Option 2 (from Hemphill or Shelbyville):

   • Use TX-184 W or TX-87 N to reach TX-21, then follow the route above.

• Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Joaquin, head west via US-84 W all the way to Gatesville — it passes directly through town.

From the Crossroad Towns (Crockett, Buffalo, Fairfield, Teague, Jewett)

General Route:

• Head west on TX-7 W, the most direct route toward Gatesville.

1. Option 1 (from Buffalo or Jewett):

   • Take TX-7 W through Marlin, then turn north onto TX-36 N.

   • Continue through Temple into Gatesville.

2. Option 2 (from Fairfield or Teague):

   • Take TX-179 W or FM 489 to intersect TX-7 W.

   • Follow TX-7 W to Marlin, then TX-36 N to Gatesville.

• Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: If coming from Crockett, head northwest on TX-21 W, then west on TX-7 W into Gatesville.

📍 Destination Details:

• Address: 8072 US-84, Gatesville, TX 76528

• Business: American Vintage Trailers

• Phone: (254) 248-1186

• Website: https://www.airstreamrepairandremodel.com

This location is situated on the eastern edge of Gatesville along US-84 – click here to get exact directions from your location.

From the Core Waco Cluster (Waco, Bellmead, Beverly Hills, Woodway, Hewitt, Lacy Lakeview, Robinson, China Spring, Lorena, Riesel, Mart, McGregor, Jonesboro, Oglesby, Crawford, Moody)

General Route:

• From Waco and surrounding suburbs, take US-84 West straight into Gatesville.

• You’ll pass through McGregor, then continue ~25–30 more miles.

• 8072 US-84 is about 4 miles east of downtown Gatesville, so watch for it as you approach town from the east.

✅ Key Turn Cue: Look for it shortly after passing the Gatesville city sign. It’s on the south side of US-84.

From the Killeen-Fort Cavazos Belt (Killeen, Harker Heights, Nolanville, Salado, Temple, Troy, Lampasas, Copperas Cove, Belton, Evant, Salado, Pearl, Purmela, Turnersville, Star)

General Route:

• Use I-14/US-190 West toward Copperas Cove.

• Exit at TX-36 North and continue into Gatesville.

• Once in town, turn right (east) on US-84, and go ~4 miles to 8072 US-84.

✅ Alternative from Salado or Troy:

• Head west on FM roads to connect directly with TX-36 N or US-84 W.

From North of Waco & Hill County (Abbott, West, Hillsboro, Itasca, Whitney, Malone, Mount Calm, Penelope, Hubbard, Coolidge)

General Route:

• Head south or west to connect with TX-22 W or TX-31 W, depending on start point.

• Then pick up TX-6 S briefly (toward Waco), or directly connect to TX-317 S.

• Once near McGregor, hop onto US-84 W to reach Gatesville.

✅ Shortcut Options:

• If closer to TX-36, just take that all the way into Gatesville.

From East of Waco (Mexia, Groesbeck, Teague, Thornton, Fairfield, Dawson, Corsicana)

General Route:

• Head west on TX-164 W or TX-14 S, depending on your location.

• Connect to TX-6 S briefly, then TX-164 W to McGregor.

• Take US-84 W to Gatesville from McGregor.

✅ Alt Route from Corsicana:

• Use TX-31 W to Hubbard → TX-171 → TX-22 W, then swing around via TX-36 N.

From South Central TX (Rosebud, Lott, Marlin, Cameron, Rockdale, Calvert)

General Route:

• Head northwest toward TX-36 N (a major artery into Gatesville from this region).

• If coming from Rockdale, use FM 487 to Salado, then TX-36 N.

• If coming from Marlin/Lott, head toward Riesel, then west to McGregor, and take US-84 W.

From the Western Approaches (Valley Mills, Clifton, Crawford, Moody, Hamilton, Hico)

General Route:

• Head west or northwest to connect to TX-36 N (if in Clifton or Valley Mills), or US-84 W via McGregor if in Moody or Crawford.

• Both routes feed directly into Gatesville.

​

📍 Destination Details:

• Address: 8072 US-84, Gatesville, TX 76528

• Business: American Vintage Trailers

• Phone: (254) 248-1186

• Website: https://www.airstreamrepairandremodel.com

This location is situated on the eastern edge of Gatesville along US-84 – click here to get exact directions from your location.

From the Austin Metro Area (Austin, Round Rock, Cedar Park, Georgetown, Pflugerville, Leander, Hutto, Taylor, Manor, Lakeway, Jarrell)

General Route:

1. Take US-183 North or I-35 North from your location.

2. Merge onto TX-29 West toward Burnet.

3. In Burnet, transition to TX-36 North.

4. Continue on TX-36 North to Gatesville.

5. In Gatesville, take US-84 East to reach 8072 US-84.​

From South of Austin (San Marcos, Kyle, Buda, Lockhart, Luling, Dale, Red Rock, Smithville)

General Route:

1. Head north on I-35 or US-183 to connect with TX-29 West.

2. Follow the same path as the Austin Metro Area from step 2 onward.​

From East of Austin (Bastrop, Elgin, Paige)

General Route:

1. Travel west on TX-21 or TX-71 to reach US-183 North.

2. Proceed to TX-29 West and follow the route as described above.​

From West/Northwest of Austin (Marble Falls, Burnet, Bertram, Florence, Lago Vista, Johnson City, Blanco, Wimberley, Dripping Springs)

General Route:

1. Use local roads to connect to TX-29 East or TX-36 North.

2. Continue on TX-36 North to Gatesville.

3. In Gatesville, take US-84 East to reach 8072 US-84.​

📍 Destination Details:

• Address: 8072 US-84, Gatesville, TX 76528

• Business: American Vintage Trailers

• Phone: (254) 248-1186

• Website: https://www.airstreamrepairandremodel.com

This location is situated on the eastern edge of Gatesville along US-84 – click here to get exact directions from your location.

From the Bryan–College Station Region (Bryan, College Station, Snook, Iola, Caldwell, Somerville, Hearne, Franklin, Normangee, Bedias, Madisonville, Navasota)

General Route:

1. Take TX-6 North to Hearne, then west on US-79 to Franklin.

2. From Franklin, continue west on FM 46 N to TX-36 N.

3. Take TX-36 N all the way through Cameron, Temple, and into Gatesville.

4. Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Bryan, you can also take FM 60 W to Caldwell, then TX-36 N up through Cameron → Gatesville.

From the TX-36 Corridor Towns (Cameron, Rockdale, Giddings, Lexington, Lincoln)

General Route:

• All of these towns sit on or near TX-36, so the route is:

  1. Take TX-36 North directly.

  2. Pass through Temple and stay on TX-36 N until Gatesville.

  3. Turn east on US-84 to reach 8072 US-84.

✅ These towns are some of the most directly connected to Gatesville — smooth ride up TX-36.

From Houston Far-Northwest & North Suburbs (Hempstead, Waller, Prairie View, Plantersville, Magnolia, Tomball, Montgomery)

General Route:

1. Take TX-105 W to Navasota.

2. From Navasota, go north on TX-6 to Hearne, then follow the Bryan/College Station route above via FM 46 to TX-36.

3. Ride TX-36 N up through Cameron > Temple > Gatesville.

4. Once in Gatesville, head east on US-84 to reach 8072 US-84.

✅ Optional: From Conroe or The Woodlands, you can cut across on FM roads to Madisonville, then use the same TX-36 N approach.

From the Southeast Crossroad Towns (Roans Prairie, Shiro, Anderson, Jewett, Marquez, Centerville, Buffalo, Flynn)

General Route:

1. These towns usually feed toward either TX-6 N or TX-7 W.

2. Use TX-7 W to reach Marlin.

3. In Marlin, take TX-7 W again to McGregor, then US-84 W into Gatesville.

4. From Gatesville, drive east 4 miles to reach 8072 US-84.

✅ Alt Route: If you’re closer to Buffalo/Centerville, cut west on TX-7 to Marlin, then follow the same pattern above.

From the Brenham Zone (Brenham, Burton, Chappell Hill)

General Route:

1. Take TX-36 N from Brenham through Caldwell > Cameron > Temple > Gatesville.

2. Stay on TX-36 N until Gatesville, then go east on US-84 to reach the destination.

✅ Simple, highway-heavy route. Minimal turns, all the way up 36.

📍 Destination Details:

• Address: 8072 US-84, Gatesville, TX 76528

• Business: American Vintage Trailers

• Phone: (254) 248-1186

• Website: https://www.airstreamrepairandremodel.com

This location is situated on the eastern edge of Gatesville along US-84 – click here to get exact directions from your location.

From the Greater Houston Core (Houston, Pasadena, Deer Park, La Porte, Channelview, Baytown, Missouri City, Sugar Land, Richmond, Rosenberg, Pearland, Alvin, Friendswood, Webster, League City, Nassau Bay, Clear Lake Shores, Taylor Lake Village)

General Route:

• Take I-10 West toward Sealy or US-59 North depending on your starting point.

1. Option 1 (from East/South Houston):
   • Merge onto TX-36 N in Sealy via I-10.
   • Follow TX-36 N through Bellville, Brenham, Cameron, Temple, and into Gatesville.
2. Option 2 (from Southwest Houston):
   • Take US-59 N to Rosenberg → TX-36 N via Needville or Pleak.
   • Continue on TX-36 N the entire way through Central TX into Gatesville.
   • Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Sugar Land or Missouri City, you can bypass some Houston traffic via FM 723 N to TX-36.

From the Galveston Bay & Gulf Coast (Galveston, Texas City, La Marque, Dickinson, Santa Fe, Seabrook, Kemah, El Lago, Bacliff, San Leon, Bayview)

General Route:

• Head west or northwest toward TX-288 N or I-45 N based on your start point.

1. Option 1 (from Galveston side):
   • Take I-45 N to Houston.
   • Merge onto US-59 N, then exit to TX-36 N via Rosenberg or Needville.
   • Continue on TX-36 N all the way through Cameron and Temple into Gatesville.
2. Option 2 (from League City/Clear Lake area):
   • Use TX-146 or local routes to reach I-45 or 288, then follow the pattern above.
   • Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: Use Beltway 8 or TX-99 (Grand Parkway) to shortcut around Houston and reach TX-36 faster.

From the Golden Triangle (Beaumont, Port Arthur, Orange, Vidor, Nederland, Groves, Lumberton, Silsbee, Kountze)

General Route:

• Head west on I-10 W toward Houston based on your start point.

1. Option 1 (from Beaumont, Port Arthur, or Orange):

   • Merge onto I-10 W through Houston.

   • Exit onto TX-36 N in Sealy via US-90 or local connector.

   • Continue on TX-36 N through Brenham, Cameron, and Temple into Gatesville.

2. Option 2 (from Lumberton, Vidor, or Silsbee):

   • Use US-69 or US-96 to reach I-10 W, then follow the pattern above.

   • Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: Use TX-146 N or FM 1409 from Liberty/Dayton area to bypass I-10 congestion and connect with TX-36 N north of Rosenberg.

From the Interior Southeast TX (Deep Piney Woods) (Woodville, Jasper, Newton, Kirbyville, Hemphill, San Augustine, Broaddus, Pineland, Bronson, Zavalla, Huntington, Chireno)

General Route:

• Head west toward TX-7 W or US-79 W depending on your location.

1. Option 1 (from Jasper, Hemphill, or Broaddus):

   • Take TX-63 or TX-184 to connect with TX-7 W.

   • Head west to Marquez, then north to Franklin, and continue on FM 46 N to TX-36 N.

   • Follow TX-36 N through Cameron and Temple into Gatesville.

2. Option 2 (from Zavalla, Huntington, or Chireno):

   • Use local roads to connect to US-69 N, then west via TX-21 W or TX-103 W toward Crockett or Centerville.

   • Join TX-7 W and follow to TX-36 N, then continue north as above.

   • Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Buffalo or Centerville, connect directly to TX-7 W to reach Marlin → then follow the TX-36 N route to Gatesville.

📍 Destination Details:

• Address: 8072 US-84, Gatesville, TX 76528

• Business: American Vintage Trailers

• Phone: (254) 248-1186

• Website: https://www.airstreamrepairandremodel.com

This location is situated on the eastern edge of Gatesville along US-84 – click here to get exact directions from your location.

From the Northern Hill Country / Highland Lakes Rim Region (Llano, Mason, Brady, San Saba, Cherokee, Richland Springs, Pontotoc)

General Route:

• Head east on TX-29 or US-190 E depending on your location.

1. Option 1 (from Llano or Mason):

   • Take TX-29 E to Burnet, then TX-281 N to Lampasas.

   • In Lampasas, turn east onto US-190 E toward Kempner → Copperas Cove → Gatesville.

2. Option 2 (from Brady or San Saba):

   • Take US-190 E or TX-16 N to Goldthwaite, then east on US-84 E into Gatesville.

• Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Mason, head east on TX-29 through Pontotoc → join US-190 E near San Saba.

From the Goldthwaite–Brownwood Belt (Goldthwaite, Zephyr, Early, Brownwood, Santa Anna, Coleman)

General Route:

• Take US-84 E or TX-36 E depending on your starting point.

1. Option 1 (from Goldthwaite or Zephyr):

   • Head east on US-84 E through Evant directly into Gatesville.

2. Option 2 (from Brownwood, Early, or Coleman):

   • Take US-84 E through Zephyr → Goldthwaite → Evant → Gatesville.

• Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Coleman or Santa Anna, head northeast on TX-153 or TX-206 to intersect with US-84 E.

From the Concho Valley Edge (Eden, Menard, Junction, Sonora, Ozona, Eldorado, Ballinger, Mertzon, Gorman, Rising Star, Cross Plains)

General Route:

• Head east or northeast toward Brownwood or Brady depending on location.

1. Option 1 (from Junction, Sonora, or Menard):

   • Take US-190 E through Brady → then follow through San Saba → Goldthwaite → Evant → Gatesville.

2. Option 2 (from Ballinger or Mertzon):

   • Head east on US-67 or TX-158, connect to TX-36 E through Comanche, then US-84 E into Gatesville.

3. Option 3 (from Cross Plains or Gorman):

   • Use TX-36 E to reach Comanche, then follow US-84 into Gatesville.

• Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Ozona or Eldorado, use US-190 E all the way through to Brady and San Saba, then follow signs to Gatesville.

From the Gateway to the Hill Country (Evant, Gustine, Comanche, De Leon, Priddy, Pearl, Star, Pottsville)

General Route:

• Use TX-36 N or US-84 E, both of which directly feed into Gatesville.

1. Option 1 (from Comanche or Gustine):

   • Take TX-36 E into Gatesville via Jonesboro.

2. Option 2 (from Evant, Priddy, or Star):

   • Take US-84 E straight through Evant into Gatesville.

3. Option 3 (from De Leon or Pottsville):

   • Use FM roads to reach either TX-36 N or US-84 E, then follow to Gatesville.

• Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Pearl, take FM 183 N to Evant, then follow US-84 E into Gatesville.

📍 Destination Details:

• Address: 8072 US-84, Gatesville, TX 76528

• Business: American Vintage Trailers

• Phone: (254) 248-1186

• Website: https://www.airstreamrepairandremodel.com

This location is situated on the eastern edge of Gatesville along US-84 – click here to get exact directions from your location.

From the Greater San Antonio Metro (San Antonio, Alamo Heights, Castle Hills, Balcones Heights, Leon Valley, Converse, Universal City, Live Oak)

General Route:

• Take I-35 N, TX-16 N, or Loop 1604 depending on location.

1. Merge onto I-35 N and continue through New Braunfels.

2. Take TX-29 W via Burnet.

3. In Burnet, transition to TX-36 N toward Gatesville.

4. In Gatesville, take US-84 E — 8072 US-84 is 4 miles out.

✅ Alternative: If coming from the west side (Alamo Ranch, SeaWorld), use TX-211 N → US-281 N → Burnet.

From the Northern Suburbs & Hill Country Fringe (Boerne, Helotes, Fair Oaks Ranch, Bulverde, Spring Branch)

General Route:

• Use TX-46 E or US-281 N to reach Burnet.

1. From Boerne/Helotes, take TX-46 E toward New Braunfels, then cut north to TX-281 N.

2. From Bulverde/Spring Branch, head north on US-281 N.

3. Continue to Burnet, then transition to TX-29 E → TX-36 N.

4. In Gatesville, take US-84 E — 8072 US-84 is 4 miles out.

✅ Alternative: From Helotes, loop up via Bandera → TX-16 N, then head east to Burnet.

From I-35 Corridor Towns (New Braunfels, Schertz, Selma, Cibolo, Garden Ridge, Marion)

General Route:

• Take I-35 N to TX-29 W.

1. Continue north past San Marcos and Kyle.

2. Take TX-29 W at Georgetown toward Burnet.

3. In Burnet, transition to TX-36 N.

4. In Gatesville, turn right on US-84 E — 8072 US-84 is 4 miles out.

✅ Alternative: From Seguin/Marion, shortcut to US-183 N → TX-29.

From South of San Antonio (Pleasanton, Floresville, Poteet, Elmendorf, Lytle)

General Route:

• Use TX-97 W, I-37 N, or US-281 N to reach the San Antonio metro.

1. From Floresville/Elmendorf: Take TX-181 N to Loop 1604, connect to US-281 N → Burnet.

2. From Pleasanton/Poteet: Use TX-97 W → I-37 N → Loop 1604 N, then follow same path.

3. Head to Burnet → take TX-36 N to Gatesville.

4. Turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: From Lytle, use I-35 N → TX-29 W to Burnet.

📍 Destination Details:

• Address: 8072 US-84, Gatesville, TX 76528

• Business: American Vintage Trailers

• Phone: (254) 248-1186

• Website: https://www.airstreamrepairandremodel.com

This location is situated on the eastern edge of Gatesville along US-84 – click here to get exact directions from your location.

From the Permian Basin (Midland, Odessa, Andrews, Gardendale, Stanton, Goldsmith, Greenwood)

General Route:

• Take I-20 E toward Big Spring, then southeast toward San Angelo or Ballinger.

1. From Midland or Odessa:

   • Take I-20 E to Big Spring

   • Then TX-350 S or TX-158 E toward San Angelo or Ballinger

   • Use US-190 E or TX-36 N through Brady → Goldthwaite → Evant → Gatesville

• In Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

✅ Alternative: Take TX-158 E from Midland direct to Ballinger, then follow TX-36 N.

From the Big Spring / South Plains Transition Area (Big Spring, Coahoma, Forsan, Lamesa, Snyder, Tahoka)

General Route:

• Head southeast from Big Spring or Lamesa to Ballinger or San Angelo.

1. From Big Spring:

   • Take TX-350 S → connect to TX-158 E toward Ballinger

   • Follow TX-36 N to Gatesville

2. From Lamesa or Snyder:

   • Use US-87 S or TX-208 S to San Angelo or Brady

   • Then take US-190 E → Gatesville

• Once in Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

From the Pecos Basin & Far West TX Region (Fort Stockton, Monahans, Crane, McCamey, Iraan, Wink, Kermit, Van Horn, Balmorhea)

General Route:

• Use I-10 E or US-67 E, then merge with US-190 E via Ozona.

1. From Fort Stockton, Monahans, McCamey, or Crane:

   • Head east on I-10 E to Ozona

   • Then take US-190 E through Brady → Goldthwaite → Gatesville

2. From Iraan or Wink:

   • Use TX-349 or US-385 to connect to I-10 E, then follow above

• In Gatesville, turn east on US-84 — 8072 US-84 is 4 miles out.

From the Trans-Pecos / Borderlands Towns (Alpine, Marfa, Presidio, Terlingua, Sanderson, Marathon)

General Route:

• From Alpine, Marfa, or Presidio: head east on US-90 or TX-118, then north to I-10 E.

• Merge onto US-190 E via Ozona → Brady → Gatesville

📍 Destination Details:

• Address: 8072 US-84, Gatesville, TX 76528

• Business: American Vintage Trailers

• Phone: (254) 248-1186

• Website: https://www.airstreamrepairandremodel.com

This location is situated on the eastern edge of Gatesville along US-84 – click here to get exact directions from your location.